Out of the options below with a Cupra Leon 2020+ vehicle. It works.
I did the coding with OBDeleven unit.
SCANDINAVIAN DRL
- Select Central Electronics 09
- Select Adaptation
- Select Daytime running lights
- Select Tagfahrlicht-Dauerfahtlicht aktiviert zusaetzlich standlicht
- Set To Active
ONLY DSG - AUTOMATIC DOOR RELEASE WHEN THE P BUTTON IS PRESSED
- Select Central Electronics 09
- Select Adaptation
- Select Zv Autolock
- Select automatic unlock nar
- Set to Active
ICE WARNING AND TEMPERATURE
-Select DASHBOARD 17
-Select Adaptation
-Selec outside_temperature
3a. p_ice_warning_exit_temperature: change the value to the desired one [Standard: "6 ° C"] (Temperature that makes the ice symbol and the acoustic beep disappear)
3b. p_ice_warning_entry_temperature: change the value to the desired one [Standard: "4 ° C"] (Temperature that makes the ice symbol appear and emits the beep) I Set it to "0"
MISSING TANK LITERS
The same coding can be obtained by spending 10 credits
-Select DASHBOARD 17
-Select Long Coding
-Select Byte 10
-Select Enable Bit 4
DRLs OFF WITH HANDBRAKE
-Select Central Electronics 09
-Select Adaptation
-Select Daytime running lights
-SET Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten to “active”
GLIDE MODE
Adaptive Cruise Control (ACC)
-Select Adaptive Cruise Control
-Select Adaptation
-Select Glide mode
-Set to not active
RLS Night Sensitivity
p_lx_rs_day:
-500 lx (default), I currently have it set up: 300 lx
p_lx_rs_dawn:
-200 lx (default), I currently have it set up: 100 lx -> A value lower than 100 cannot be set.
Lane Assist Settings
- Select Module A5 (Driver Assistance)
- Select Long Coding
- Select Configuration For Lane Departure Warning K15
- Set To Last Setting
Overtaking Right Prevention
- Select Control unit 13
Function:
Long Coding (0)
- Select overtaking_right_prevention
- Set from activated to Deactivated